Weld Certification & Xrays

WELDED STRUCTURAL PARTS +

1. Certificate Of Inspection for test welds

2. Packing slip

3. Xray .....PIC1.......PIC2......PIC3......PIC4.......PIC5......PIC6.......PIC7......PIC8

4. Weld Pictures

.....First Sample ..........First sample 1&2 .......Second Sample ........First sample inside

.....Topside B section.....section 4 A 2 ..........section 4 A .......section 3A3

.....section 3B2 ......section 3B3 ......section 3B

5. Alejandro's Pictures

Sample 1

Weld sample 1 has been cut into five pieces, and these have been numbered 1 through 5.

Sample One .............2, 3, 4, and 5 ............ 1, 2, and 3............. 1, 2, and 3 lateral view...............2 and 3 ...............2 and 3 from side ................2 and 3 in between ...............4 and 5 ...............5 and 3.............1............2.............3...........4.............5.............5 from insided

Welding sections have been labeled with letters following the number of the piece they are on.

2A...3A.....................2B...4B......................4C...5C..................3D...5D...................3E...1E

Close up pictures of piece 5 where dirt can accumulate.

Inside............Corner

Sample 2

Weld sample 2 has been cut into three pieces: A, B and C.

Sample Two........... Sample Two side view................Sample Two diagonal view............Sample Two close up

Piece A and B.....................Piece A and C ....................A......................B......................C

Welding sections have been labeled with numbers following the letter of the piece they are on. Sample 2 only has two weld sections.

A1...B1..............................A2...C2

Close up pictures of the weld joints

A from outside..............A from inside............B from outside...............C from outside

Department of Defense inspection of weld sample 2

CEDTECH Inspection on sample 2

X-Rays

1.................2..................3..................4...................5.....................6..................7...................8

Sample 3

Mike's Stainless Weld Sample 10-3-07

1. front side. . . . . . . Close up

2. Back side . . . . . . Close up

3. Left side . . . . . . . Close up

4. Right side . . . . . . . Close up