Procedures for recovering from power outage at 
LIGO 40 Meter Laboratory

v1.0, AJW, 2/4/02

CONTROL ROOM
- Cycle power on all Sun workstations and monitors,
  they should reboot automatically.
  Log in as cit40m

  Currently: 
  - rana  (gateway from 113 net to general computing)
  - asterope (Dennis' desktop)
  - op240m
  - dmt140m

- turn on all General Computing PCs and log in as cit40m
  Currently:
  - Steve's PC
  - Bob's PC
  - mxx
  - mxx

- Check network switches in network rack,
  make sure all hubs are working
  - Make sure all GC computers can see, eg, the web
  - print to printer

IFO HALL
________

- HVAC check

- PSL enclosure interlock check

- Check condition power units

- Check all breakers

OP140M and CDSSOL6
- Soon, all VME processors will boot off of op140m
  (currently, most boot off of cdssol6).
  Cycle power on these 2 machines and their monitors;
  they should boot automatically.
  Log on as controls .  
- Start medm on both machines;
  bring up epics screens for PSL, vacuum, Checklist
  (If DAQS and VME are down, these won't read
   anything useful yet).
  Most screens are in 
  /export/home/controls/medm .
  Vacuum control screen is hidden in
  /export/home/40mVacScipe/adl/VacControl.adl
  Eventually, these should all be in
  op140m:/cvs/cds/Caltech/

VACUUM RACK
- make sure UPS is up
- power up all power strips on rack
- turn on power supplies
- turn on all gauge controllers
- turn on rs232 breakout box
- turn on vme crate
- After everything looks normal on the epics screen,
  You may then power on TP1, TP2, TP3,
  and open valves.

DAQ RACKS
- Power on the VMIC reflective memory
- turn on power supplies
- turn on vme crates
- power on fb40m and br40m
- log on to fb40m
  daqd and nds should automatically start.
- Check DAQ epics screen;
  check /usr1/frames/ for frames being logged.
- If not working, kill daqd (ps -ef; kill -9 nnnn)
  and it will restart itself.
- Run dataviewer on fb40m 
- Run dataviewer on, eg, dmt40m (can't do this right now?).

PSL RACK
- turn everything on
- check PSL enclosure interlock

PSL POWER
- power on PSL
- scan the PSL table for stray beam

STACIS
- Cycle power on all 4 STACIS controllers