If you are registered your Login name and computer name will appear on the
If you are not registered you must download the software from VRVS website
Click on the icon that represents your scheduled conference, the link should have a yellow activation box.
Next is to configure Video.
A box will pop up asking, 'What do you want to do with this file?' (open it)
Here you click on Menu.
1st place a check mark in the radio button 'Transmit' located on the top of the page
Here you will select composite.
Select 320 x 240 this configuration seems to work out the best.
After you set this section up then click close this panel.
Next we have to configure the audio part.
A box will pop up asking, 'What do you want to do with this file?' (open it)
Then the audio will extract. The speaker icon is for audio output and the mic is for input, you must
homepage of VRVS, then click on the(yellow icon) located on the middle of page, to join a schueduled conference.
"link to VRVS software"
accept the defaults then you must close your browser
then relaunch your browser once again, then register yourself.
Next proceed to the following instructions.
Then scroll over to select your conference.
2ed select 'Configure on transmit' located on the bottem of the page second.
only select 'Transmit option' to start video when reconnecting the next time around or you stand a
GOOD CHANCE
on crashing the program starting with 'vic.exe illegal operation' and so on.
make sure the the buttons are pushed out not in. Then make your adjustments with volume control.
do not select quit!
Then you just want to set aside the audio program on the desktop or minimize. This should be all
the information you need to complete this setup; one thing is when you are finish with your conference
you must click on the Quit buttons to end your conference or your computer stands a good chance on freezing
then you will have to do a hard reboot.