The COC interfaces are governed by:
T010075-00
Advanced LIGO System Design Document
T010076-01
Optical Layout for Advanced LIGO
COC interfaces with
SUS - Suspensions
AOS
- Auxiliary Optics
Optical Layout webpabe
Images of layout_2-22-06
Edrawing images of layout 02-22-06
eDrawings free viewing software
IO - Input Optics
SUS Interface
MOUNTING
FLATS
Flatness: l/10 - Sheila
Rowan et al / Physics Letters A 246 (1998) 471-478
Dimensions: < 95 mm x full width - Peter Fritschel T040008,
"Optical loss due to suspension mounting flats"
Tolerances: same as SF2 penultimate mass D040278-01
SF2 glass properties
SF2 Material Safety Data Sheet
AOS Interface
COATINGS
All coatings (HR and AR) are to be > 5% reflective
at 675nm,
for angles of incidence between 0° and 45°,
for both polarizations, p and s
Mike Smith; e-mail 4-9-2004, 11:02am
WEDGE ANGLE
Per T010076
COMPENSATION PLATES
Material (absorption): Absorption <5ppm/cm
nominal, requirement is TBD
Size: 65mm x 340mm M040005
Coatings: AR nominal, requirement is TBD
IO Interface
|