Optomechanical Layout Working Group Action Items
#	Status	Action Item	Comments/Status	Who	Due	Assigned
1	Closed	Write ME SolidWorks designer job description & have Ed Jasnow distribute to contracting companies.		Dennis Coyne	ASAP	12/1
2	Closed	Luke to work on AL mechanical design/CAD in support of AOS. Luke thinks this starts Feb.Dennis to check with Carol & Dave R.		Dennis Coyne	ASAP	12/1
3	Closed	Get setup with & begin to use PDMWorks		All	ASAP	12/1
4	Closed	Mike will check to see if there is a way to get continuous ray lines exported from Zemax: Response: The lines are continuous (not segmented). Each ray has all others as part of its assembly, so there is redundant definition, but this does not seem to be a problem.		Mike Smith		12/1
5	Closed	Determine practical limits for large assemblies in SW -- ask SWs, GoEngineer, Keck Telescope project personnel about best practices		Calum Torrie	Feb-06	12/1
6	Closed	Send IO SolidWorks files to Mike Smith for his use in the overall layout and to archive in PDMWorks		Luke Williams		12/1
7	Closed	Luke to send Mike his IO layout in SolidWorks including his 3D "skinny" models of triple etc.		Luke Williams		12/1
8	Open	Calum & Mike to flesh out the concept of a "high frequency" double pend with a lightweight suspended catcher so that we have (at least) a realistic envelope for layout purposes.	Matlab simulation by Norna? Limiter/stop design for the pendulum? Rough dimensions, spring design done?	Mike, Calum, Norna	1/12	12/1
9	Closed	Mike will forward his lightweight ITM baffle concept/definition to Tim Hayler (RAL) to attach onto the quad SUS.		Mike Smith	1/5	12/1
10	Open	SW/PDMW Model: Define a 3D envelope for the BS suspension	some calculations based on Norna's Matlab design done -- need to complete & generate a 3D envelope model	Dennis Coyne	1/5	12/1
11	Closed	Ken & Mike to put the SolidWorks 3D layout into the PDMWorks vault under the project "AL Layouts", including the IO layout files sent by Luke to Mike.		Ken Mailand Mike Smith	1/5	12/1
12	Open	Revise/correct the AL Optical Layout document, T010076-01, consistent with Mike's latest Zemax & SolidWorks layout		Mike Smith Dennis Coyne	1/19	12/22
13	Open	plan for decision on stable recycling cavity	outline: a) define a workable layout, b) Phil determines implications for thermal compensation, c) Hiro develops FFT model to handle analysis of ROC tolerance etc., d) Hiro & Phil apply FFT model to determine if stable & nearly degenerate PRC work	Dennis Coyne Peter Fritschel	3/29/2006	3/9/2006
14	Open	layout for marginally stable PRC: can we do with just 5 HAMs?	in progress	Mike, Luke & Dennis	3/17/2006	3/9/2006
15	Open	layout for stable PRC: can we do with just 5 HAMs?	stable PRC presentations/documents posted to web page	Mike, Luke & Dennis	3/17/2006	3/9/2006
16	Open	Simple SEI system representation into PDMW vault		Dennis	3/17/2006	3/9/2006
17	Open	SW/PDMW Model: BSC chamber model with brackets & internal support ring		Dennis	3/17/2006	3/9/2006
18	Open	Hire mechanical designer/draftsperson	in the process of interviewing	Mike, Janeen, Dennis	3/17/2006	3/9/2006
19	Open	SW/PDMW Model: PRM & SRM Triple SUS envelope	planform dimensions of an MMT3 with height of a triple? … or does the SUS team have a better definition?	Luke, Janeen, Calum	3/17/2006	3/9/2006
20	Open	SW/PDMW Model: quad ETM/ITM controls prototype model	fix broken links, clean up directory	Calum	4/3/2006	3/9/2006
21	Open	SW/PDMW Model: FM/ITM combined envelope	rough planform in AutoCAD 2D layout. Needs lots of work to make it real	?	5/1/2006	3/9/2006
22	Open	SW/PDMW Model: Layout with HAM2 moved to +Y side of HAM1 for ISCT readout of REFL & PO beam		Mike & Luke	3/17/2006	3/9/2006
				Last revision	11-Mar-06